Sam4s ER-380 Specifications download pdf (Page 60)

58 • S-Mode Programming ER 380/380M Electronic Cash Register v2.2

Clearing Memory

Before you use your ER-380/ER-380M for the first time, you must perform a memory all clear to

insure that all totals and counters are cleared and that the default program is installed.

CAUTION: The procedures described in this area are security sensitive. Clearing the

ER-380/ER-380M memory after the register is put into service will erase all programming as

well as totals and counters. Do not share this information with unauthorized users and

distribute the special SERVICE-Mode key only to those you may want to perform these

functions.

Memory All Clear

1. Unplug the register.

2. Turn the control lock to the S position.

3. Press and hold the key position where the CHECK key is located on the default

keyboard layout.

4. Continue to hold the CHECK key while plugging the register into a power source.

5. Press the upper left key of the keyboard, then the lower left key, then the upper right key,

and finally press the lower right key.

6. After a short delay, the printer will print the message: "RAM ALL CLEAR OK !"

Memory is cleared and the default program is installed.

Clear All Totals and Counters

1. Turn the control lock to the S position.

2. Enter 20 and press the SBTL key.

2 0 SBTL

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 151 152

No comments

Sam4s ER-380 Specifications Page 60